> J-DRain Turfcore            Turfcore Synthetic Field Brochure Full field coverage   > J-DRain MVP-12           MVP Athletic Field Brochure    Maximum Velocity & Performance (MVP) Drainage Composites > J-DRain SWD-12          SWD Athletic Field Brochure    Site Water Drainage (SWD) Composites . Available in 12" wide x 165 length rolls'.                J-DRain MVP-12                                        J-DRain SWD-12
	J-DRain Turfcore is designed as a technically advanced drainage for synthetic fields..It consists of a heavy duty sheet cupaged under heat and pressure to form a high compression, high flow drainage core which is then cut into seperate sheets to allow for expansion and contraction and bonded to a layer of non-woven fabric.  It is designed to enhance G-Max performance as well as allowing water to move quickly and effectively to the perimeter drains.  The rolls are 8 1/2 feet wide and can be made to custom lengths to provide easier installation. J-DRain SWD-12 & MVP-12 provides a cost effective alternative to pipe and gravel under-drains when constructing synthetic turf playing fields. By replacing these under-drains, trench excavation costs are eliminated and the amount of gravel fill is greatly reduced. J-DRain MVP-12 is laid horizontally across the field at specified intervals (normally 10 to 15 ft.) and provides rapid drainage from the playing field (see below).  Design Schemes: There are many design variables when preparing a lay-out for the various synthetic turf fields. These variables include: slope of surface, length and width of area, collector locations, discharge point, rainfall intensity and many others. Let J-DRain professionals prepare a suggested drainage design scheme for your project free of charge! Visit the Help Desk for details. Use J-DRain MVP for: > Highway edge drain > Natural turf athletic fields > Synthetic turf athletic fields > Golf course greens, tees, fairways and bunkers; > Landscape around buildings and home sites > Sidewalk edge drains J-DRain MVP is a composite turf drainage system consisting of a 3-dimensional, high flow, drainage core and a non-woven, needle-punched filter fabric. The filter fabric is wrapped and bonded to the drainage core, preventing intrusion of the filter fabric into the flow channels during the backfilling process. Soil particles are held back by the filter fabric and water passes through to the drainage core allowing water to be collected and conveyed to the discharge point. Visit Installation Instructions & Details or Product Data Sheets & Specifications for more info. ES evaluated. Report No. ESR-1901